رله 5 ولت شیشه ای 8 پایه 16 آمپر Omron G2R-1-E-5VDC

افزودن به لیست علاقه مندیها

شماره فنی :	G2R-1-E-5VDC
برند سازنده:	Omron
کشور سازنده:	اندونزی
ولتاژ:	5 ولت دی سی
مدل قطعه:	رله کتابی

قیمت برای شما

تماس با ما

021-66753870
021-66727621
ارتباط از طریق واتس آپ با شماره 09012350078

Coil

Item Rated voltage Classification		Rated current (mA)		Coil resistance (Ω)	Must operate voltage (V)	Must release voltage (V)	Max. voltage (V)	Power consumption (VA, W)
Item Rated voltage Classification		50 Hz	60 Hz	Coil resistance (Ω)	% of rated voltage			Power consumption (VA, W)
•Standard •Quick-connect •Fully sealed •High-capacity	12 VAC	93	75	65	80% max.	30% min.	140% (at 23°C)	Approx. 0.9 (60 Hz)
	24 VAC	46.5	37.5	260
	100/(110) VAC	11	9/(10.6)	4,600
	200/(220) VAC	5.5	4.5/(5.3)	20,200
•Standard •High-capacity •Bifurcated contact •Quick-connect •Fully sealed	5 VDC	106		47	70% max.	15% min.	170% (at 23°C)	Approx. 0.53
	6 VDC	88.2		68
	12 VDC	43.6		275
	24 VDC	21.8		1,100
	48 VDC	11.5		4,170
	100 VDC	5.3		18,860
•High-sensitivity	5 VDC	71.4		70	70% max.	15% min.	170% (at 23°C)	Approx. 0.36
	6 VDC	60		100
	12 VDC	30		400
	24 VDC	15		1,600
	48 VDC	7.5		6,400

Note:	1.	The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of+15%/-20% (AC rated current) or ±10% (DC coil resistance).
	2.	AC coil resistances shown above are only reference values.
	3.	The operating characteristics are measured at a coil temperature of 23°C.
	4.	The “Max. voltage” is the maximum voltage that can be applied to the relay coil.

Coll: Double-winding Latching Relays

Item Rated voltage	Set Coil		Reset coil		Must operate voltage (V)	Must release voltage (V)	Max. voltage (V)	Power consumption (VA, W)
Item Rated voltage	Rated current (mA)	Coil resistance (Ω)	Rated current (mA)	Coil resistance (Ω)	% of rated voltage			Set Coil (mW)	Reset coil (mW)
5 VDC	167	30	119	42	70% max.	70% max.	140% (at 23°C)	Approx. 850	Approx. 600
6 VDC	138	43.5	100	60
12 VDC	70.6	170	50	240
24 VDC	34.6	694	25	960

Note:	1.	The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of+15%/-20% (AC rated current) or ±10% (DC coil resistance).
	2.	The operating characteristics are measured at a coil temperature of 23°C.
	3.	The “Max. voltage” is the maximum voltage that can be applied to the relay coil.

Contacts: Flux Protection Type

Classification Number of poles Load Item	Standard type Quick-connect Terminal (1single-pole type)
	1-pole		2-pole
	Resistive load	Inductive load (cosφ = 0.4; L/R = 7 ms)	Resistive load	Inductive load (cosφ = 0.4; L/R = 7 ms)
Contact type	Single
Contact material	Ag-alloy (Cd free)
Rated load	10 A at 250 VAC 10 A at 30 VDC	7.5 A at 250 VAC 5 A at 30 VDC	5 A at 250 VAC 5 A at 30 VDC	2 A at 250 VAC 3 A at 30 VDC
Rated carry current	10 A		5 A
Max. switching voltage	380 VAC, 125 VDC
Max. switching current	10 A		5 A
Failure rate (P level) (reference value) *	100 mA at 5 VDC		10 mA at 5 VDC

Classification Number of poles Load Item	High-capacity type		Bifurcated contact type
	1-pole		2-pole
	Resistive load	Inductive load (cosφ = 0.4; L/R = 7 ms)	Resistive load	Inductive load (cosφ = 0.4; L/R = 7 ms)
Contact type	Single		Bifurcated
Contact material	Ag-alloy (Cd free)
Rated load	16 A at 250 VAC 16 A at 30 VDC	8 A at 250 VAC 8 A at 30 VDC	5 A at 250 VAC 5 A at 30 VDC	2 A at 250 VAC 3 A at 30 VDC
Rated carry current	16 A		5 A
Max. switching voltage	380 VAC, 125 VDC
Max. switching current	16 A		5 A
Failure rate (P level) (reference value) *	100 mA at 5 VDC		10 mA at 5 VDC

Classification Number of poles Load Item	High-sensitivity type
	1-pole		2-pole
	Resistive load	Inductive load (cosφ = 0.4; L/R = 7 ms)	Resistive load	Inductive load (cosφ = 0.4; L/R = 7 ms)
Contact type	Single
Contact material	Ag-alloy (Cd free)
Rated load	5 A at 250 VAC 5 A at 30 VDC	2 A at 250 VAC 3 A at 30 VDC	3 A at 250 VAC 3 A at 30 VDC	1 A at 250 VAC 1.5 A at 30 VDC
Rated carry current	5 A		3 A
Max. switching voltage	380 VAC, 125 VDC
Max. switching current	5 A		3 A
Failure rate (P level) (reference value) *	100 mA at 5 VDC		10 mA at 5 VDC

Contacts: Fully Sealed Type

Classification Number of poles Load Item	Standard type (Single contact type)
	1-pole		2-pole
	Resistive load (cosφ = 1)	Inductive load (cosφ = 0.4; L/R = 7 ms)	Resistive load (cosφ = 1)	Inductive load (cosφ = 0.4; L/R = 7 ms)
Contact type	Single
Contact material	Ag-alloy (Cd free)
Rated load	8 A at 250 VAC 8 A at 30 VDC	6 A at 250 VAC 4 A at 30 VDC	4 A at 250 VAC 4 A at 30 VDC	1.5 A at 250 VAC 2.5 A at 30 VDC
Rated carry current	8 A		4 A
Max. switching voltage	380 VAC, 125 VDC		380 VAC, 125 VDC
Max. switching current	8 A		4 A
Failure rate (P level) (reference value) *	100 mA at 5 VDC		10 mA at 5 VDC

* This value was measured at a switching frequency of 120 operations/min.

Classification Number of poles Load Item	Bifurcated contact type
	1-pole
	Resistive load (cosφ = 1)	Inductive load (cosφ = 0.4; L/R = 7 ms)
Contact type	Bifurcated
Contact material	Ag-alloy (Cd free)
Rated load	5 A at 250 VAC 5 A at 30 VDC	2 A at 250 VAC 3 A at 30 VDC
Rated carry current	5 A
Max. switching voltage	380 VAC, 125 VDC
Max. switching current	5 A
Failure rate (P level) (reference value) *	1 mA at 5 VDC

* This value was measured at a switching frequency of 120 operations/min.

Contacts: Latching Type

Classification Load Item	1-pole		2-pole
Classification Load Item	Resistive load (cosφ = 1)	Inductive load (cosφ = 0.4; L/R = 7 ms)	Resistive load (cosφ = 1)	Inductive load (cosφ = 0.4; L/R = 7 ms)
Contact type	Single
Contact material	Ag-alloy (Cd free)
Rated load	5 A at 250 VAC 5 A at 30 VDC	3.5 A at 250 VAC 2.5 A at 30 VDC	3 A at 250 VAC 3 A at 30 VDC	1.5 A at 250 VAC 2 A at 30 VDC
Rated carry current	5 A		3 A
Max. switching voltage	380 VAC, 125 VDC		380 VAC, 125 VDC
Max. switching current	5 A		3 A
Failure rate (P level) (reference value) *	100 mA at 5 VDC		10 mA at 5 VDC

* This value was measured at a switching frequency of 120 operations/min.

Characteristics
Standard Relays

Number of poles Item		1-pole	2-pole
Contact resistance *1		30 mΩmax. *2	50 mΩ max.
Operate time *3		15 ms max.
Release time *3		AC: 10 ms max.; DC: 5 ms max.
Max. operating frequency	Mechanical	18,000 operations/hr
Max. operating frequency	Electrical	1,800 operations/hr
Insulation resistance *4		1,000 MΩ min.
Dielectric strength	Between coil and contacts	5,000 VAC, 50/60 Hz for 1 min
	Between contacts of different polarity		3,000 VAC, -50/60 Hz for 1 min
	Between contacts of the same polarity	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Vibration resistance	Malfunction	10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance	Destruction	1,000 m/s²
Shock resistance	Malfunction	200 m/s² when energized; 100m/s² when no energized
Durability	Mechanical	AC coil: 10,000,000 operations min.; DC coil: 20,000,000 operations min. (at 18,000 operations/hr)
Durability	Electrical	100,000 operations min. (at 1,800 operations/hr under rated load)
Ambient operating temperature		-40°C to 70ºC (with no icing)
Ambient operating humidity		5% to 85%
Weight		Approx. 17 g (Approx. 20 g *5)

Note: The values here are initial values.

*	1.	Measurement conditions: 5 VDC, 1 A, voltage-drop method.
*	2.	High-capacity type: 100 mΩ max.
*	3.	Measurement conditions: Rated operating voltage applied, not including contact bounce.
*	4.	Measurement conditions: The insulation resistance was measured with a 500 VDC megohmmeter at the same locations as the dielectric strength was measured.
*	5.	Value for quick-connect terminals.

Double-winding Latching Relays

Number of poles Item		1-pole	2-pole
Contact resistance *1		30 mΩmax. *2	50 mΩ max.
Set	Time *2	20 ms max.
Set	Min. set pulse width	30 ms
Reset	Time *2	20 ms max.
Reset	Min. reset pulse width	30 ms
Max. operating frequency	Mechanical	18,000 operations/hr
Max. operating frequency	Electrical	1,800 operations/hr
Insulation resistance *3		1,000 MΩ min.(at 500 VDC)
Dielectric strength	Between coil and contacts	5,000 VAC, 50/60 Hz for 1 min
	Between contacts of different polarity		3,000 VAC, -50/60 Hz for 1 min
	Between contacts of the same polarity	1,000 VAC, 50/60 Hz for 1 min
Vibration resistance	Destruction	10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Vibration resistance	Malfunction	10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance	Destruction	1,000 m/s²
Shock resistance	Malfunction	Set: 500m/s² Armature OFF Reset: 200m/s² Contact OFF
Durability	Mechanical	100,000 operations min. (at 1,800 operations/hr under rated load)
Durability	Electrical	100,000 operations min. (at 1,800 operations/hr under rated load)
Ambient operating temperature		-40°C to 70ºC (with no icing or condensation)
Ambient operating humidity		5% to 85%
Weight		Approx. 17 g

اسپرینت الکترونیک ارائه کننده انواع قطعات الکترونیکی از قبیل رله - میکروسوییچ - تک سوییچ - رید سوییچ و رید رله می باشد. اسپرینت الکترونیک تخصصی ترین فروشگاه قطعات الکترونیکی و دارای کاملترین مجموعه از رله های omron امرن و نمایندگی رله های هلی شان Helishun و رایکس Rayex تایوان، که از بالاترین کیفیت در بین کارخانه های تولید کننده رله می باشد. سایر برند های معتبر در زمینه رله مانند شراک ,SCHRACK تایکو ,tyco پاناسونیک ,Panasonic فیندر finder ، زیمنس ,Siemens هونگفا ,Hongfa ان اچ جی NHG ,فوجیتسو Fujitsu تیانبو ,Tianbo اچ کا ای ,HKE لیمینگ LIMING نیز قابل ارائه می باشد.

مجموعه کامل از رله های 5 ولت - رله های 12 ولت , رله های 24 ولت , رله های 110 ولت و 220 ولت در تیپ و سایز های مختلف اعم از رله های کتابی - رله های میلون 5 پایه - رله های شیشه ای امرن - رله های مخابراتی - رله های آمپر بالا و کولری
رله های خاص و کمیاب در اسپرینت الکترونیک بزرگترین فروشگاه قطعات الکترونیکی